Week 7 & 8: 3D Scanning at Beckman & Geomagic

During these two weeks we learned all about 3D scanning and an editing software called Geomagic. We had already done a bit of 3D scanning a few weeks ago when we made our busts, but this was a completely different process.

First off, Travis Ross, our tour guide and guest speaker led our session in Beckman and taught us how the basics of Geomagic. We split up into groups because of room size constraints in the lab with the 3D scanner we were working with. I was in the second round group.

I started on the 4th floor of Beckman and got to see a bunch of 3D printed objects using a variety of materials not used in the Maker Lab. We got to compare the materials and really see what other 3D printers could do. My personal favorite was the heart print.

2015-03-03 14.43.03

 

The heart looked so realistic and opened up my eyes to the capabilities of 3D printing.

I’m working on a project right now about medical uses for 3D printing, and this heart may come up again so look out for that post in the coming weeks.

 

During my time on the 4th floor, I also got to watch a small scale 3D laser scanner in action. It was extremely slow, but it gave us a good idea of the larger scale one we were going to see in the basement. Also, we were told that the smaller scanner could be more useful for certain scans do to limitation on the larger one. The main limitation was surface type. The larger scanner could not process shiny material very well, but the smaller one could.

Moving down to the basement where the main purpose for the trip was intended we got to hear all about the larger scanner. The main component to the scanning process was the platform that the object sits that is being scanned. It was on a rotating disk to reach all side angles, and was capable of tilting up or down to see any missing spots.

When I got down to the basement, there was an object already being worked on that I’m sure the owner (Arielle) will write about in her post. We ended up focusing on that scan the whole time I was in the basement. This is where we were first introduced to the editing software, Geomagic. Once the object was successfully scanned in at many different angles, Geomagic is used to cut out unwanted parts of the scan (like the table it rests on and any components holding the object into place). Side note: every individual scan that is taken must be edited, so the goal is to get the whole object in one scan.

After editing the unwanted parts of the scan, there were some holes that needed to be filled. Most of the time, the holes were minor and could me manually filled without any issues. But sometimes, depending on the object being scanned, there are areas that the scan cannot reach and must be estimated. Travis ran into this issue with the object he was scanning, so he attempted to rotate the platform to a specific angle to try to reach a bit more of the object.

The next time we saw Travis was in our home, the Maker Lab. During this time we were directly using Geomagic on the lab computers (also the main reason why I don’t have any pictures for you this week, sorry). Travis taught us how to trim or fill parts, how to smooth a surface, and how to divide the object into pieces for further editing. Surprising most of his instructions were pretty easy to follow and I was able to do a lot of the things he was showing us how to do. The hardest for me was the dividing up the object because I got a bit behind and missed a step and didn’t get a chance to catch up. But overall, I can say I know how to use some basic functions of Geomagic after this experience.

Again, stay tuned for more with the 3D heart! And apologies for the lack of pictures.

Digital making log: Week 4

This week we utilized scanning equipment to scan our heads for 3D printing. We had classmates scan our faces onto a cloud, and then we took those scans and scaled them in our modeling software.

From there we could do anything to our 3D mugs. We could put hats on, type our names into our foreheads – anything. I wanted to go the practical route and inserted a hole into my head, making it a fine mug.

From there, I flattened the back-side of my head and printed two additional components: a plank and a handle. When all three components were printed, I simply glued it together. Check it out:

IMG_0070

 

Of course, it probably isn’t safe to drink out of this, so I think I’ll just use it as a coin cup for now.

What I’ve learned

This new print has propelled me farther than I was before Not only can I print something, but I now also can print multiple things separately as long as they’re scaled to fit together just right.

I also know how to use scanning equipment, so if I ever want to, I can get an app and accessory for my roommates iPad and start doing these scans myself!

With this knowledge in my backpocket, I’m thinking I can continue to grow, most importantly, in learning how to model well.

I may never be able to produce something as complex as a face without the assistance of a scanner, but maybe I can get close enough.